- Books
- Posters
- DVDs
- Safety Hardware - WAH Rescue Kits
- Safety Hardware - Push/Pull Pole
- Self Assessment Cards
WORKING AT HEIGHT RESCUE PACKS:
The Work at Height Regulations specify that every employer must plan for emergencies and rescue from height. The need for rapid and effective rescue is particularly important for personnel using protective systems such as harnesses, where a delay may have drastic consequences, particularly if the person is injured.
By utilizing one of the NSL rescue kits as part of your rescue plan you can recover a casualty easily and quickly, so reducing the risk of suspension trauma.
Telescopic Pole Rescue System
The Telescopic Pole Rescue System is a compact, self contained rescue system which allows a casualty to be recovered by a single rescuer. Once the casualty has been connected, they can be raised or lowered by one person to a safe place. The wide casualty attachment hook can be fastened to various points on the casualty for simplicity and ease of operation.
System features: 3.25m Rigid Telescopic Pole, Haul Cam Patented Rope Grab, Karabiner, Pulley, Quadra Rope Device (various lengths available), “Protects” Anchor Sling, Carrying Bag.
Rope lengths available: 25m (80ft), 50m (165ft), 75m (250ft), 100m (330ft)
Double Rope Rig System
Two ropes attached to the lower side of the Petzl Rigging Plate provide a means by which various rescues can be performed. This system allows a rescuer to be lowered large distances to a casualty (i.e. on a derrick structure); either to simply release the casualty onto the rescue rope or to provide urgent first aid prior to a rescue being carried out.
System Features: Two independent Adjustable Webbing Anchor Slings (Petzl Connexon Vario C42V) attached via auto locking (Ball Lock) Karabiners to the top edge of a (Petzl) Rigging Plate.
Rope lengths available: 60m (200ft), 30m (100ft), 15m (50ft)
Rescue Kits can be customised to suit environmental requirements. NSL also provide essential training for your chosen Rescue Kit.
PUSH/PULL POLES
Push / Pull Poles are designed to help facilitate ‘hands-free’ lifting. They are a modified aluminium telescopic boat hook with a rubber buffer at the other end. The hook end can be used at full extension (approximately 2.1m / 7ft) to retrieve tag lines hanging vertically without a load handler having to go too close to a suspended load.
The rubber buffer is used to push against suspended loads to guide them, especially when landing loads in tight or congested spaces. Once again, this allows the operator to remain a safe distance from the load until it has landed. The poles would normally be fully retracted (for rigidity) during this type of use where their length is 1.2m / 4ft. However, they can be used half-extended if required but if too much pressure is applied, they will telescope in.
SAFETY AWARENESS MATERIALS
We offer safety awareness materials and training packages to all industries, whether the operation is lifting a load on an oil rig installation, working at height on a power or telecommunication mast, a wind farm generator, or simply carrying building materials on a construction site, we can help you reduce the risks.
Our industrial Safety Awareness Materials include Handbooks, Posters, Wall Canvases, DVDs, Training Packs, and more. All offered in a variety of languages including UK English, American English, Arabic, Urdu, Portuguese, Spanish & Russian.
CUSTOMISED SAFETY AWARENESS MATERIALS
Our highly experienced Technical Authors working alongside our in-house Graphic Design department can write and produce new materials designed specifically around your needs. We regularly produce client specific handbooks, posters and training courses. Either written from scratch, or interpreting and simplifying complex company procedures & policies into easily understood documents.
If you are interested in any of our safety materials, please email sales@nsl-aberdeen.com